REMOVAL AND INSTALLATION



Pre-removal and Post-installation Operation
  • Discharging and Recharging refrigerant (Refer to ).
  • Air Cleaner Intake Duct (Refer to GROUP 15 - Air Cleaner <4B1,4J1>, <4N1>).
  • Headlamp support upper panel cover (Refer to GROUP 51, Radiator Grille )
  • Hood latch (Refer to GROUP 42A - Hood ).
  • Headlamp support panel upper (Refer to GROUP 42A - Loose Panel ).





Removal steps
<<A>>
>>A<<
1.
A/C compressor discharge hose connection


2.
O-ring


3.
Clamp
<<A>>

4.
A/C condenser outlet pipe connection


5.
O-ring


6.
Condenser assembly
note Condenser fan removal and installation refer to GROUP 14A - Radiator <4B1, 4J1>, <4N1>.

REMOVAL SERVICE POINT



<<A>> A/C COMPRESSOR DISCHARGE HOSE AND A/C CONDENSER OUTLET PIPE DISCONNECTION


caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.

INSTALLATION SERVICE POINT



>>A<< A/C COMPRESSOR DISCHARGE HOSE INSTALLATION


Assemble the clamp into the condenser assembly, and then assemble the A/C condenser discharge hose into the clamp.