SPECIAL TOOLS


Tool
Number
Name
Use


MB990784
Ornament remover
Removal of switch, lamp and trim


MB991955

  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
M.U.T.-III sub-assembly

  1. Vehicle Communication Interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III measure adapter
  6. M.U.T.-III trigger harness
caution M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B should not be used for this vehicle.
SWS communication line check (ECU check and service data)


MB992006
Extra fine probe
Continuity check and voltage measurement at harness wire or connector


MB991960
Intermediate wiring harness for SWS customisation
SWS communication line check (ECU check, service data)


MB991223

  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222
Harness set

  1. Check harness
  2. LED harness
  3. LED harness adapter
  4. Probe
Continuity check and voltage measurement at harness wire or connector

  1. For checking connector pin contact pressure
  2. For checking power supply circuit
  3. For checking power supply circuit
  4. For connecting a locally sourced tester


MB991813

  1. MB991806
  2. MB991812
  3. MB991822
SWS monitor kit

  1. SWS monitor cartridge
  2. SWS monitor harness (for column-ECU)
  3. Probe harness
SWS communication line check (ECU check and service data)


MB991529
Diagnosis code check harness

  • Input signal check by using a voltmeter
  • Diagnosis code reading
  • Levelling motor drive test