SPECIAL TOOLS


Tool
Number
Name
Use



    MB992080
    a: MB992081
    b: MB992082


    Belt tension meter set
    a: Belt tension meter
    b: Microphone assembly

Drive belt tension check


MB991955

    a: MB991824
    b: MB991827
    c: MB991910
    d: MB991911
    e: MB991825
    f: MB991826
M.U.T.-III sub assembly

    a: Vehicle communication interface (V. C. I.)
    b: M.U.T.-III USB cable
    c: M.U.T.-III main harness A (Vehicles with CAN communication system)
    d: M.U.T.-III main harness B (Vehicles without CAN communication system)
    e: M.U.T.-III adapter harness
    f: M.U.T.-III trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.

  • Checking the ignition timing
  • Checking the idle speed



MB991992
Torque wrench adaptor
Removal and installation of V.V.T. sprocket assembly mounting bolt


MD998772
Valve spring compressor
Valve spring compression


MB992090
Retainer holder attachment


MB992089
Retainer holder C


MB992085
Valve stem seal pliers
Valve stem seal removal


MB992677
Valve stem seal installer adjustable
Valve stem seal press-fitting


MD998727
Oil pan FIPG cutter
Engine oil pan removal


MD998781
Flywheel stopper
Supporting the flywheel assembly


MB991993
Crankshaft front oil seal guide
Crankshaft front oil seal installation


MB990699
Differential oil seal installer


MB991454
Engine hanger balancer
Supporting the engine and transmission assembly
note Special tool MB991454 is a part of engine hanger attachment set MB991453.


MB991527
Hanger


MB991895
Engine hanger
When the engine hanger is used: Supporting the engine assembly during removal and installation of the timing chain case assembly or transmission assembly


MB991928

    a: MB991929
    b: MB991930
    c: MB991931
    d: MB991932
    e: MB991933
    f: MB991934
Engine hanger

    a: Joint (50) × 2
    b: Joint (90) × 2
    c: Joint (140) × 2
    d: Foot (standard) × 4
    e: Foot (short) × 2
    f: Chain and hook assembly


MB992000
Crankshaft adapter
Cranking of the engine after the crankshaft pulley removal