Code No. P2101: Throttle Valve Control Servo Magneto Malfunction
OPERATION
- Controls the current that is applied from the engine-ECU (terminals No. 15,
No. 16) to the electronic-controlled throttle valve (terminals No. 1, No. 2).
FUNCTION
- Engine-ECU check whether the throttle valve control servo magneto failed.
TROUBLE JUDGMENT
Check Condition
- Battery positive voltage is more than 8.3 V.
- The coil current of the throttle valve control servo is more than 8 A.
FAIL-SAFE AND BACKUP FUNCTION
- Throttle opening degree position is in default position.
PROBABLE CAUSES
- Failed throttle valve control servo.
- Short circuit or harness damage in throttle valve control servo circuit or lose
connector contact.
- Failed engine-ECU
DIAGNOSIS PROCEDURE |
STEP 1. Connector check: B-12 electronic-controlled throttle valve connector |
Q.
Is the check result normal?
|
Go to Step 2 . |
|
Repair or replace the connector. |
|
STEP 2. Check throttle valve control servo itself. |
Q.
Is the check result normal?
|
Go to Step 3 . |
|
Replace the throttle body assembly. |
|
STEP 3. Connector check: B-26 engine-ECU connector |
Q.
Is the check result normal?
|
Go to Step 4 . |
|
Repair or replace the connector. |
|
STEP 4. Check harness between B-12 (terminal No. 1) electronic-controlled throttle valve connector and B-26 (terminal No. 15) engine-ECU connector. |
|
Q.
Is the check result normal?
|
Go to Step 5 . |
|
Repair the damaged harness wire. |
|
STEP 5. Check harness between B-12 (terminal No. 2) electronic-controlled throttle valve connector and B-26 (terminal No. 16) engine-ECU connector. |
|
Q.
Is the check result normal?
|
Go to Step 6 . |
|
Repair the damaged harness wire. |
|
STEP 6. M.U.T.-III diagnosis code |
|
Q.
Is diagnosis code set?
|
Replace the engine-ECU. |
|
Intermittent malfunction (Refer to GROUP 00 -
How to Use Troubleshooting/Inspection
Service Points -
How to Cope with Intermittent Malfunctions ). |
|