Inspection Procedure 2: The Engine Warning Lamp Does Not Illuminate Right after the Ignition Switch is Turned to the "ON" Position
OPERATION
- The combination meter illuminates the engine warning lamp just after the
ignition switch is in the ON position.
- If the engine warning lamp is not illuminated just after the ignition switch is
in the ON position, the failure could possibly be caused by the defective engine warning lamp,
open/short circuit of the combination meter and so on.
PROBABLE CAUSES
- Failed engine warning lamp
- Open/short circuit in the combination meter
DIAGNOSIS PROCEDURE |
STEP 1. M.U.T.-III diagnosis code. |
Q.
Is the diagnosis code set?
|
 Inspection chart for diagnosis code (Refer to  ). |
|
 Go to Step 2 . |
|
STEP 2. Check the trouble symptoms. |
Q.
Does the trouble symptom persist?
|
| Check combination meter system (Refer to GROUP 54A -
Combination Meter -
Trouble Symptom
Chart ). |
|
| Intermittent malfunction (Refer to GROUP 00 -
How to Use Troubleshooting/Inspection
Service Points -
How to Cope with Intermittent Malfunctions ). |
|