REMOVAL AND INSTALLATION



Removal steps


·.
 Front pillar trim, Centre pillar trim upper, Quarter trim upper (Refer to ).


1.
 Assist grip clip (driver’s side) <Vehicles without curtain air bag>


2.
 Roof inside assist grip (driver’s side) <Vehicles with curtain air bag>


3.
 Assist grip cover


4.
 Roof inside assist grip


5.
 Front room lamp assembly (Refer to GROUP 54A -Interior Lamp ).


6.
 Security alarm sensor cover


7.
 Sun visor
<<A>>
8.
 Sun visor holder


9.
 Headlining garnish (front) <Vehicles with roof window glass>


10.
 Headlining garnish cover (rear) <Vehicles with roof window glass>


11.
 Headlining trim


12.
 Rear room lamp assembly (Refer to GROUP 54A - Room Lamp ).
<<B>>
13.
 Headlining


14.
 Headlining garnish <Vehicles with roof window glass>


15.
 Spot lamp assembly


·.
 Curtain air bag module mounting bolt (Refer to GROUP 52B - Curtain Air Bag Module ).


16.
 Assist grip bracket


17.
 Map lamp bracket

REMOVAL SERVICE POINTS

<<A>> SUN VISOR HOLDER REMOVAL

Insert the special tools ornament remover (MB990784) into the sun visor holder from its left and right sides to disengage the claws on the sun visor holder sides.

<<B>> HEADLINING REMOVAL

To remove the clip, insert a vinyl cord into a clearance between the clip and the headlining, and pass it around the clip. Then, pull out the clip downwards while pulling the vinyl cord.

Remove the headlining by inserting the special tool in the clearance of the dual lock fastener. <Vehicles with roof window glass>