|
| caution |
- Never measure the curtain air bag module circuit resistance
even with the specified tester. Measuring the circuit resistance with a tester causes accidental
air bag deployment due to current that flows or static, resulting in serious personal injury.
- When replacing the parts, discard the old parts after deploying the air bag according
to the specified procedure (Refer to
 ).
- There must be no abnormality to the curtain air bag deployment section of headlining.
|
If any malfunction is found in the following inspections, replace with a new curtain air
bag module.
- Crack, dent or deformation to inflator surface
- Torn air bag
- Damaged connector, deformation of terminal, and harness binding
|