Code No. B2510 Auto-levelling not initialised

caution

If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, always diagnose the CAN bus lines.
Before replacing the ECU, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.

DIAGNOSTIC FUNCTION

note

^*: When the height sensor related diagnosis code (B2514 or B2516) or headlamp automatic levelling-ECU related diagnosis code (B2511 or B2512) is set, initialisation of the headlamp automatic levelling system is impossible, therefore perform the troubleshooting for the diagnosis code that has been set previously.

JUDGEMENT CRITERIA

PROBABLE CAUSES

Headlamp automatic levelling system initialisation not completed
Malfunction of the headlamp automatic levelling-ECU