|
|
1.Carry out the following check.
Inspection procedure
|
Inspection conditions
|
Items to be checked (Normal conditions)
|
1
|
Brake pedal: Depressed
|
Electric motor switch position: LOCK (OFF)
|
The selector lever cannot be moved out of P position.
|
2
|
Electric motor switch position: Other than LOCK (OFF)
|
The selector lever can be moved from P position to other positions smoothly.
|
3
|
Selector lever position: Other than P
|
Electric motor switch cannot be turned to LOCK (OFF) position.
|
4
|
Selector lever position: P
|
Electric motor switch can be smoothly turned to LOCK (OFF) position.
|
|
|
|
2.When there is a problem with above operation, remove and reassemble the key interlock cable (selector lever side).(Refer to  .)
|
|
|
3.After the assembly, perform the operation check again. If there is a problem, replace the key interlock cable.(Refer to .)
|