REMOVAL AND INSTALLATION

caution

Before removing the front seat assembly, refer to GROUP 52B, Service precautions

and Side-airbag module (S)

			Removal steps
		1.	Front anchor cover cap
		2.	Rear anchor cover
		·	Seat belt switch harness connector
<<A>>		·	Side air bag harness connector
		·	Heated seat harness connector (driver’s side <Vehicles with heated seat>
	>>A<<	3.	Front seat assembly

REMOVAL SERVICE POINT

<<A>> SIDE AIR BAG HARNESS CONNECTOR DISCONNECTION

When disconnecting the side air bag module connectors of C-24 and C-29, unlock the connector by sliding the locking button to the direction of the arrow as shown in the figure, and then disconnect the connector.

INSTALLATION SERVICE POINT

>>A<< FRONT SEAT ASSEMBLY INSTALLATION

1.Temporarily tighten the bolts and nats in all mounting locations shown in the illustration with no load applied to the front seat cushion and check the operation of the seat slide.
2.Tighten the bolts in all mounting locations to the specified torque.