SPECIAL TOOLS


Tool
 No.
 Name
 Use



    MB991955
    A: MB991824
    B: MB991827
    C: MB991910
    D: MB991911
    E: MB991825
    F: MB991826
    M.U.T.-III sub-assembly
    a: Vehicle communication interface (V. C. I.)
    b: M.U.T.-III USB cable
    c: M.U.T.-III main harness A (applicable to vehicles with CAN communication)
    d: M.U.T.-III main harness B (applicable to vehicles without CAN communication)
    e: M.U.T.-III Measure adapter
    f: M.U.T.-III Trigger harness
caution For vehicles with CAN communication, use the M.U.T.-III main harness A to send simulated vehicle speed. If you connect the M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Checking diagnosis code


MB991865
 Dummy resistor
 SRS air bag and seat belt pre-tensioner circuit check


MB991866
 Resistor harness
 Driver’s and passenger’s (front) air bag and side-airbag circuit check


MB991884
 Resistor harness
 Seat belt pre-tensioner and curtain air bag circuit check


MB990784
 Ornament remover
 Removal of cover.


MB990803
 Steering wheel puller
 Steering wheel disconnection


MB686560
 Adapter harness
  • Deployment of passenger’s (front) air bag module inside the vehicle
  • Deployment of passenger’s (front) air bag module outside the vehicle


MB991885
 Adapter harness
 Deployment of seat belt pre-tensioner and curtain air bag inside or outside the vehicle


MB991223

    a: MB991219
    b: MB991220
    c: MB991221
    d: MB991222
 Harness set

    a: Check harness
    b: LED harness
    c: LED harness adapter
    d: Probe
 Continuity check and voltage measurement at harness wire or connector

    a: For checking connector pin contact pressure
    b: For checking power supply circuit
    c: For checking power supply circuit
    d: For connecting a locally sourced tester


MB992006
 Extra fine probe
 Continuity check and voltage measurement at harness wire or connector