STANDARD PART/TIGHTENING-TORQUE TABLE




  1. Bolts, nuts and washers are all made of steel and plated with zinc.
  2. The threads and bearing surface of bolts and nuts are all in dry condition.


  1. If toothed washers are inserted.
  2. If plastic parts are fastened.
  3. If bolts are tightened to plastic or die-cast inserted nuts.
  4. If self-tapping screws or self-locking nuts are used.

STANDARD BOLT AND NUT TIGHTENING TORQUE
Thread size
 Torque N·m
Bolt nominal diameter (mm)
 Pitch (mm)
 Head mark "4"
 Head mark "7"
 Head mark "8"
M5
 0.8
 2.5 ± 0.5
 5.0 ± 1.0
 6.0 ± 1.0
M6
 1.0
 5.0 ± 1.0
 8.5 ± 1.5
 10 ± 2
M8
 1.25
 11 ± 2
 20 ± 4
 24 ± 4
M10
 1.25
 23 ± 4
 42 ± 8
 53 ± 7
M12
 1.25
 42 ± 8
 80 ± 10
 93 ± 12
M14
 1.5
 70 ± 10
 130 ± 20
 150 ± 20
M16
 1.5
 105 ± 15
 195 ± 25
 230 ± 30
M18
 1.5
 150 ± 20
 290 ± 40
 335 ± 45
M20
 1.5
 210 ± 30
 400 ± 60
 465 ± 65
M22
 1.5
 290 ± 40
 540 ± 80
 630 ± 90
M24
 1.5
 375 ± 55
 705 ± 105
 820 ± 120

FLANGE BOLT AND NUT TIGHTENING TORQUE
Thread size
 Torque N·m
Bolt nominal diameter (mm)
 Pitch (mm)
 Head mark "4"
 Head mark "7"
 Head mark "8"
M6
 1.0
 5.0 ± 1.0
 10 ± 2
 12 ± 2
M8
 1.25
 13 ± 2
 24 ± 4
 28 ± 5
M10
 1.25
 26 ± 5
 50 ± 5
 58 ± 7
M10
 1.5
 25 ± 4
 46 ± 8
 55 ± 5
M12
 1.25
 47 ± 9
 93 ± 12
 105 ± 15
M12
 1.75
 43 ± 8
 83 ± 12
 98 ± 12
note
  • Be sure to use only the specified bolts and nuts, and always tighten them to the specified torques.
  • Bolts marked with indications such as 4T or 7T are reinforced bolts. The larger the number, the greater the bolt strength.