Code No. P2229: Barometric Pressure Sensor Circuit High Input


FUNCTION



  • The barometric pressure sensor converts the barometric pressure into a voltage signal and inputs the signal to the engine-ECU.
  • In response to the signal, the engine-ECU corrects the fuel injection amount, etc.

TROUBLE JUDGMENT


Check Conditions
  • Battery positive voltage is 8 - 16 V
  • 2 seconds later after the ignition switch has been in "ON" position or the engine has started up
Judgment Criterion
  • The barometric pressure sensor output voltage is 1.60 V or less for 0.5 second.

PROBABLE CAUSE



  • Failed barometric pressure sensor

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III data list

  • Refer to Data List Reference Table .

  1. Item 05: Barometric pressure sensor

Q. Is the check result normal?
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions .)
Replace the engine-ECU. When the engine-ECU is replaced, write the chassis number (Refer to GROUP 00 - How to Perform Chassis Number Writing ). After replacing the engine-ECU, register the injector identification code and learn fuel injection (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ).