GEAR OIL REPLACEMENT


1.Remove the filler plug.
2.Remove the drain plug and drain oil.
3.Tighten the drain plug to the specified torque.
Tightening torque: 60 ± 10 N·m
4.Add the oil until the level comes to the lower portion of the filler plug hole.
Specified gear oil:

    Hypoid gear oil API classification GL-5 or higher
    Above 10°C: SAE 90
    Below 10°C: SAE 80W
5.Tighten the filler plug to the specified torque.
Tightening torque: 50 ± 10 N·m