REPLACEMENT OF REPLACEABLE BULB

HEADLAMP BULB REPLACEMENT

caution

Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

1.Disconnect the battery.

2.Disconnect the connector.

3.Remove the socket cover.
4.Remove bulb mounting spring to pull out bulb.
5.After bulb is replaced, properly reconnect connector.

POSITION LAMP BULB REPLACEMENT

caution

Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

Disconnect the connector, and twist the position lamp socket to remove it.

FRONT TURN-SIGNAL LAMP BULB REPLACEMENT

caution

Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.

Disconnect the connector, and twist the front turn-signal lamp socket to remove it.