|
When the ignition key is removed and then the driver’s door is opened with turning
ON the tail lamp or the head lamp, the buzzer sounds continuously to warn the driver that the
lamp remains ON.
|
|
ETACS-ECU buzzer sounds simultaneously with the blinks of the turn-signal lamp and the
hazard lamp.
| note |
Using a customisation function, the turn-signal operation sound function can be enabled
or disabled (Refer to  ).
|
|
|
If the vehicle speed sent from the engine-ECU via CAN communication exceeds 8 km/h
when a door is open for one second or more, the ETACS-ECU makes the door ajar indicator lamp
flash 16 times and activates the buzzer (beeping 16 times) to inform the driver that a door
is open.
| note |
Using the customisation function, the control content of door-ajar warning buzzer function
can be adjusted (Refer to ).
|
|
|
|
With the ignition switch turned to "ON" or "ST" position (IG1: ON), ETACS-ECU uses the
signal from the driver’s seat belt switch, passenger’s seat belt switch <double
cab>, seat occupancy sensor <double cab> and the vehicle speed signal to sound the buzzer
when the following conditions are met. (Timer activation)
|
|
|
·
Control only when the ignition switch is ON
With the driver’s seat belt switch turned ON (the driver’s seat belt
is not fastened) or the passenger’s seat belt switch turned ON (the passenger’s
seat is occupied and the passenger’s seat belt is not fastened), the buzzer sounds for
6 seconds after IG1 is turned ON.
|
|
|
·
Control while driving
Starting when 60 seconds have elapsed after IG1 is turned ON, if the following conditions
are met, with 0.5-second delay, the cycle of 5-second buzzer sounding with 2.8-second interval
is repeated for 12 times (timer activation).
When IG1 is ON and the seat belt switch is ON (the driver’s seat belt is
not fastened) or the passenger’s seat belt switch turned ON (the passenger’s
seat is occupied and the passenger’s seat belt is not fastened), the vehicle speed reaches
8 km/h.
|
