|
|
The engine-ECU stores the change of the DPF system caused by the various driving conditions
as the learning value and uses it for assumption of the PM accumulated amount or for the acceptance/rejection
criteria of the DPF system. For this reason, the learning value is necessary to be initialized
when the parts related to the DPF system are replaced.
|
|
|
1.After the ignition switch is in "LOCK" (OFF) position, connect M.U.T.-III with the
diagnosis connector.
|
|
|
2.Ignition switch is in "ON" position.
|
|
|
3.Select the "SPECIAL FUNCTION" from the "FUNCTION MENU" on the M.U.T.-III.
|
|
|
4.Select the INITIALIZATION from the SPECIAL FUNCTION.
|
|
|
5.Select the item on the screen of the initialization for learning, and perform the
initialization.
|