|
|
1.Start the engine and allow it to warm up until the temperature of the coolant reaches
80 °C to 90 °C.
|
|
|
2.Remove the engine oil filler cap.
|
|
|
3.
| warning |
Use care as oil could be hot.
|
Remove the drain plug to drain oil.
|
|
4.Install a new drain plug gasket so that it faces in the direction shown in the illustration,
and then tighten the drain plug to the specified torque.
Tightening torque: 39 ± 5 N·m
| note |
Install the drain plug gasket so it faces in the direction shown in the illustration.
|
|
|
5.Refill with specified quantity of oil.
Specified Engine Oil
- ACEA classification: "For service A1/B1, A3/B3, A3/B4 or A5/B5"
- API classification: "For service CF-4"
Total quantity (Includes volume inside oil filter and oil cooler):
<2WD with 15 inch tyres> 7.4L
<2WD with 16 inch tyres, 4WD> 6.4L
| note |
Select engine oil of the proper SAE viscosity number according to the atmospheric temperature.
|
6.Install the engine oil filler cap.
7.Check oil level.
|
|
|
1.Start the engine and allow it to warm up until the temperature of the coolant reaches
80 °C to 90 °C.
|
|
|
2.Remove the engine oil filler cap.
|
|
|
3.
| warning |
Use care as oil could be hot.
|
Remove the drain plug to drain oil.
|
|
4.Install a new drain plug gasket so that it faces in the direction shown in the illustration,
and then tighten the drain plug to the specified torque.
Tightening torque: 39 ± 5 N·m
| note |
Install the drain plug gasket so it faces in the direction shown in the illustration.
|
|
|
5.Refill with specified quantity of oil.
Specified Engine Oil
- ACEA classification: "For service C1, C2, C3 or C4"
- JASO classification: "For service DL-1"
Total quantity (Includes volume inside oil filter and oil cooler):
<2WD with 15 inch tyres> 7.4L
<2WD with 16 inch tyres, 4WD> 6.4L
| note |
Select engine oil of the proper SAE viscosity number according to the atmospheric temperature.
|
6.Install the engine oil filler cap.
7.Check oil level.
|