REMOVAL AND INSTALLATION <Vehicles with steel fuel filter case>

Post-installation Operation

Evacuation of Air from Fuel Line (Refer to GROUP 13A - On-vehicle Service, Evacuation of Air from Fuel Line ).

			Removal steps
	>>B<<	1.	Fuel line hose connection
		2.	Fuel filter assembly
		3.	Fuel line plug (drain plug)
		4.	Water level switch
<<A>>	>>A<<	5.	Fuel filter
		6.	Fuel filter pump
		7.	Fuel line plug (air plug) and O-ring

REMOVAL SERVICE POINT

<<A>> FUEL FILTER REMOVAL

Fix the fuel filter body to a vice, and then remove the fuel filter using an oil filter wrench.

INSTALLATION SERVICE POINTS

>>A<< FUEL FILTER INSTALLATION

1.Clean the mounting surface on the fuel filter body side.

2.Tighten the fuel filter to the specified torque from the point where the gasket contacts the mounting surface.
Tightening torque: Approximately 3/4 - 1 turn (12 ± 2 N·m)

>>B<< FUEL LINE HOSE INSTALLATION

If the pipe has a stepped part, connect securely up to the stepped part. If the pipe has no stepped part, insert so that the inserted portion 20 - 25 mm long.