REMOVAL AND INSTALLATION


Pre-removal Operation
  • Lower Panel Assembly Removal (Refer to GROUP 52A - Instrument Panel Assembly ).
  • Drivers side under cover <Except vehicles Single cab> Removal (Refer to GROUP 52A - Instrument Panel Assembly ).
  • ETACS-ECU Removal. <LHD>

 Post-installation Operation
  • ETACS-ECU Installation. <LHD>
  • Drivers side under cover <Except vehicles Single cab> Installation (Refer to GROUP 52A - Instrument Panel Assembly ).
  • Lower Panel Assembly Installation (Refer to GROUP 52A - Instrument Panel Assembly ).
  • Clutch Pedal Adjustment (Refer to ).




Removal steps


1.
 Snap pin


2.
 Clevis pin


3.
 Clutch pedal assembly


4.
 Adjusting bolt <Vehicles without cruise control>

>>A<<
 5.
 Clutch switch <Vehicles with cruise control>


6.
 Return spring


7.
 Bushing


8.
 Stopper


9.
 Pedal stopper


10.
 Pedal pad

INSTALLATION SERVICE POINT

>>A<< CLUTCH SWITCH <VEHICLES WITH CRUISE CONTROL> INSTALLATION

Install the clutch switch at the specified dimension when the clutch pedal is released.