FRONT AXLE GEAR OIL LEVEL CHECK <4WD>
| 1.Remove the under cover and filler plug. |
 |
2.Check that gear oil level is not 8 mm below the bottom of filler plug hole. 3.If the gear oil level is lower than the lower limit, add the specified gear oil until the level comes to the lower portion of the filler plug hole. Specified gear oil: MITSUBISHI MOTORS GENUINE Super Hypoid Gear Oil API classification GL-5 SAE 80 or SAE 90 4.Tighten the filler plug to the specified torque. Tightening torque: 50 ± 10 N·m |