|
|
1.Park the vehicle on a flat, level surface.
|
|
|
2.Move the transmission control lever to the neutral position or the selector lever
to the "N" position. Then place the transfer sift lever to the "2H" position <4WD>.
Apply the parking brake. Raise the vehicle on a jack.
|
|
3.Turn the companion flange clockwise as far as it will go. Make the mating mark on
the dust cover of the companion flange and on the differential carrier.
|
|
4.Turn the companion flange anti-clockwise as far as it will go, and measure the amount
of distance the mating marks moved.
Limit: 5 mm
5.If the backlash exceeds the limit value, remove the differential carrier assembly
and check the following.
- Drive gear backlash (Refer to
 )
- Differential gear backlash (Refer to )
|