|
|
1.With the engine running (hydraulic operation), set the front wheels straight ahead.
|
|
|
2.Measure the play on the steering wheel circumference before the wheels start to move
when slightly moving the steering wheel in both directions.
Maximum limit: 30 mm or less
|
|
|
3.When the play exceeds the limit, check for the play on the steering shaft and steering
linkage connection. Correct or replace.
|
|
|
4.If the free play still exceeds the limit value, set the steering wheel straight ahead
with the engine stopped. Load 5 N towards the steering wheel circumference and check the play.
Standard value (steering wheel play with the engine stopped): 10 mm or less
If the play exceeds the standard value, remove the steering gear (Refer to  )
and check the total pinion torque (Refer to ).
|