|
|
1.If the anti-trap function (safety mechanism) is activated consecutively three times
or more, the fully closed position that the rear panel power window-ECU has learned will be erased
(initialised).
|
|
|
2.Operate the rear panel power window switch and fully open the rear slide window glass.
|
|
|
3.
| caution |
The anti-trap function does not work until the rear panel power
window-ECU completes learning the fully closed position (It is because the anti-trap function
is reset).
|
Operate the rear panel power window switch and fully close the rear slide window glass.
The rear panel power window activates for 0.7 second and stops automatically when the rear panel
power window switch is pressed once. Repeat this operation until the rear slide window glass
fully closes and release the rear panel power window switch once. Then, hold the rear panel
power window switch to the fully closed side again for one second so that the rear panel power
window switch completes learning the fully closed position.
| note |
If the rear panel power window switch is operated to open the rear slide window glass
while the rear panel power window-ECU is learning, learning will be cancelled. If this happens,
return to step 2.
|
|
|
|
Operate the rear panel power window switch to fully close the rear slide window glass
by one-shot up action so that the rear panel power window-ECU will complete learning (Initialisation is
not needed).
|