|
Connect the (+) terminal of the battery to the power seat connector terminal
No.2 and the (-) terminal to terminal No.1, and check that the power seat works normally.
|
|
|
|
Battery voltage
|
Tester connection
|
Specified condition
|
Not applied
|
3 - 4
|
Open circuit
|
- Connect terminal 2 to the positive battery terminal
- Connect terminal 1 to the negative battery terminal
|
Continuity (Less than 2 Ω)
|
|
|
|
Inspect the heated seat switch for continuity.
|
|
Switch position
|
Tester connection
|
Specified condition
|
Note
|
HI
|
1 - 2
|
Continuity (Less than 2 Ω)
|
|
2(+) - 6(-)
|
Indicator
|
3 - 4
|
Illumination
|
OFF
|
3 - 4
|
Illumination
|
LOW
|
2 - 5
|
|
2(+) - 6(-)
|
Indicator
|
3 - 4
|
Illumination
|
|
|
|
Measure the resistance between the terminals.
Standard value (At room temperature 20 °C):
|
|
Connector, terminal No.
|
Specified condition
|
Connector 2, terminal 3 - Connector 2 - 1, terminal
1
|
3.79 - 4.53 Ω
|
Connector 2, terminal 1 - Connector 2 - 1, terminal
1
|
3.98 - 4.76 Ω
|
Connector 2, terminal 3 - Connector 2, terminal 1
|
0.22 - 0.26 Ω
|
|
|
|
Measure the resistance between the terminals.
Standard value (At room temperature 20 °C):
|
|
Tester connection
|
Specified condition
|
1 - 2
|
5.01 - 6.00 Ω
|
|
|