|
|
1.Check that the current tyre inflation pressures meet the inflation pressure label
(Refer to GROUP 31 - On-vehicle Service  ).
|
|
|
2.Move <4WD> transfer shift lever to "4H" position.
|
|
3.Set the vehicle on the speedometer tester and set the front wheels on the free roller.
4.For prevention of front wheel lateral runout, install chain or wire (the other end
of which is tightly fixed on front towing hooks) on the vehicle.
|
|
5.For prevention of rear wheel lateral runout and of vehicle from starting out, install
extension fittings on rear towing hooks, and install both ends in the anchor plate.
6.Check that the speedometer indicating range is within the standard value and the needle
fluctuation is within the limit.
Standard value <Speedometer to display km/h only>:
|
|
Speed km/h
|
Speedometer indicating tolerance km/h
|
20
|
20.0 - 24.0
|
40
|
40.0 - 44.0
|
80
|
80.5 - 85.5
|
120
|
121.5 - 127.5
|
160
|
162.5 - 169.5
|
|
Standard value <Speedometer to display MPH and km/h>:
|
|
Speed km/h (mph)
|
Speedometer indicating tolerance km/h (mph)
|
20 (10)
|
20.0 - 24.0 (10.0 - 12.5)
|
40 (25)
|
40.0 - 44.0 (25.0 - 27.5)
|
80 (50)
|
80.5 - 85.5 (50.3 - 53.5)
|
120 (75)
|
121.5 - 127.5 (76.0 - 80.0)
|
160 (100)
|
162.5 - 169.5 (101.5 - 106.0)
|
|
Limit: Needle fluctuation (Vehicle speed is 35 km/h or more) ± 3
km/h
|