|
|
1.Remove the radiator condenser tank mounting bolt.
|
|
|
2.Move the radiator condenser tank to a place where it will not be a hindrance when checking the drive belt tension.
|
|
3.
| caution |
Check the drive belt tension after turning the crankshaft clockwise one turn or more.
|
Make sure that the indicator mark on the alternator drive belt auto-tensioner is within the area marked with A in the illustration.
4.If the mark is out of the area A, replace the alternator and others belt (Refer to  ).
| note |
The alternator and others belt tension check is not necessary as the alternator drive belt auto-tensioner is adopted.
|
5.Tighten the radiator condenser tank mounting bolt to the specified torque.
Tightening torque: 12 ± 2 N·m
|