REMOVAL AND INSTALLATION







Removal steps


1.
Vacuum pipe and hose


2.
Purge hose


3.
Chamber


4.
Purge hose


5.
Water hose


6.
Water pipe


7.
Throttle body stay

>>B<<
8.
Throttle body

>>B<<
9.
Throttle body gasket


10.
Solenoid valve


11.
O-ring

>>A<<
12.
Manifold absolute pressure (MAP) sensor


13.
O-ring

INSTALLATION SERVICE POINTS



>>A<< MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSTALLATION


caution
  • Install the manifold absolute pressure (MAP) sensor, taking care not to give a shock to it.
  • Do not use a manifold absolute pressure (MAP) sensor that has fallen down.

>>B<< THROTTLE BODY GASKET / THROTTLE BODY INSTALLATION



1.Make sure that the throttle body gasket is placed before installing the throttle body.
2.Temporarily tighten throttle body and throttle body stay mounting bolts at A and B in the illustration.
3.Tighten the throttle body mounting bolt at illustrated position A to the specified torque of 20 ± 2 N·m.
4.Tighten the throttle body mounting bolts at illustrated position B to the specified torque of 9.5 ± 2.5 N·m.