
|
1.Apply the parking brake, and check that the selector lever moves smoothly and accurately
to each position. 2.Check that the engine starts when the selector lever is in the N or P position, and
that it does not start when the selector lever is in any other position. 3.Start the engine, release the parking brake, and check that the vehicle moves forward
when the selector lever is moved from N position to the D position, and that the vehicle reverses
when the selector lever is moved to the R position. 4.Stop the engine. 5.Turn the ignition switch to the ON position, and check that the backup lamp illuminates
when the selector lever is shifted from the P position to the R position.
| note |
The A/T mis-operation prevention mechanism prevents movement of the selector
lever from the P position if the ignition switch is in a position other than LOCK (OFF) position
and the brake pedal is not depressed.
|
|