Code No. C2200 Abnormality in ABS-ECU


caution
  • If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C, CAN Bus Diagnosis Table ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.

OPERATION
ABS-ECU controls ABS by calculating the data sent from the wheel speed sensor and the G sensor.

DIAGNOSIS CODE SET CONDITIONS
This diagnosis code is set when ABS-ECU has malfunction.

PROBABLE CAUSES
ABS-ECU malfunction

DIAGNOSTIC PROCEDURE

STEP 1. M.U.T.-III CAN bus diagnostics
Use M.U.T.-III to diagnose the CAN bus lines.

Q. Is the check result normal?
Go to Step 2.
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnosis table ). On completion, go to Step 2.

STEP 2. Diagnosis code recheck after resetting CAN bus lines

Q. Is the diagnosis code No.C2200 set?
Replace the hydraulic unit (ABS-ECU) (Refer to ). Then go to Step 3.
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).

STEP 3. Diagnosis code recheck after resetting CAN bus lines

Q. Is the diagnosis code No.C2200 set?
Return to Step 1.
This diagnosis is complete.