INSPECTION


BRAKE LINING THICKNESS CHECK

1.Measure the lining thickness at the most worn area.
Standard value: 2.8 mm
Limit: 1.0 mm
2.If the thickness is less than the limit value, replace the right and left shoe and lining assemblies as a set.

BRAKE DRUM INSIDE DIAMETER CHECK

1.Measure the inside diameter of the brake drum at two positions or more.
Standard value:

    168.0 mm <Except RALLIART>
    190.0 mm <RALLIART>
Limit:

    169.0 mm <Except RALLIART>
    191.0 mm <RALLIART>
2.If the inside diameter is more than limit value or if there is excessive wear, replace the brake disc.