REMOVAL AND INSTALLATION


Post-installation operation
  • Tailgate alignment (Refer to .)




Striker removal

>>D<<
 1.
 Striker



Tailgate lock release handle removal steps


·
 Tailgate trim lower (Refer to GROUP 52A - Tailgate Trim .)

>>C<<
 2.
 Tailgate lock release handle



Tailgate latch removal steps


·
 Tailgate trim lower (Refer to GROUP 52A - Tailgate Trim .)

>>B<<
 3.
 Tailgate latch assembly



Tailgate lock key cylinder removal steps <Vehicles without keyless entry system>


·
 Tailgate trim lower (Refer to GROUP 52A - Tailgate Trim .)

>>A<<
 4.
 Tailgate lock key cylinder


5.
 Cover

INSTALLATION SERVICE POINTS

>>A<< TAILGATE LOCK KEY CYLINDER INSTALLATION

Install the mounting nuts of tailgate lock key cylinder in the order shown in the illustration.

>>B<< TAILGATE LATCH ASSEMBLY INSTALLATION

Install the mounting bolts of tailgate latch assembly in the order shown in the illustration.

>>C<< TAILGATE LOCK RELEASE HANDLE INSTALLATION

Install the mounting bolts of tailgate lock release handle in the order shown in the illustration.

>>D<< STRIKER INSTALLATION

Install the striker so that the striker centre does not deviate more than ±1.5 mm from the latch centre.