REMOVAL AND INSTALLATION


Post-installation operationSunroof lid glass assembly and sunroof assembly

  • Sunroof leakage check (Refer to .)
  • Sunroof alignment (Refer to .)
  • Learning procedures for sunroof fully closed position (Refer to .)




Sunroof switch removal


·
 Sunroof switch (Refer to GROUP 54A - Interior Lamp .)



Sunroof lid glass assembly removal


1.
 Sunroof lid glass assembly



Sunroof motor assembly removal steps


·
 Headlining (Refer to GROUP 52A, - Headlining .)


2.
 Sunroof motor assembly



Sunroof assembly removal steps


·
 Headlining (Refer to GROUP 52A, - Headlining .)


3.
 Drain pipe connection
<<A>>
4.
 Sunroof assembly



Front drain pipe <Driver’s side> removal steps


·
 Headlining (Refer to GROUP 52A, Headlining .)


·
 Instrument panel cover lower (Refer to GROUP 52A - Instrument lower panel .)

>>A<<
 5.
 Front drain pipe <Driver’s side>



Front drain pipe <Passenger’s side> removal steps


·
 Headlining (Refer to GROUP 52A - Headlining .)

>>A<<
 6.
 Front drain pipe <Passenger’s side>



Rear drain pipe removal steps


·
 Headlining (Refer to GROUP 52A - Headlining .)


·
 Rear speaker box assembly <Vehicles with audio amplifier> (Refer to GROUP 54A - Speaker .)

>>A<<
 7.
 Rear drain pipe

REMOVAL SERVICE POINT

<<A>> SUNROOF ASSEMBLY REMOVAL

Use a pair of long nose pliers or the like to remove the sunroof assembly while turning it in the direction shown in the figure.

INSTALLATION SERVICE POINT

>>A<< FRONT DRAIN PIPE/REAR DRAIN PIPE INSTALLATION

Install the grommet, and adjust the drain pipe projection as shown.