INSPECTION



CONTINUITY TEST OF HEATED SEAT SWITCH




1.Check for continuity between terminals.
Item
Switch position
Tester connection
Specified condition
Driver’s seat side
HI
1 - 5, 3 - 8
Continuity exists (2Ω or less)
OFF
1 - 5, 3 - 5, 5 - 8
Open circuit
LO
3 - 5
Continuity exists (2Ω or less)
Passenger’s seat side
HI
4 - 5, 8 - 9
Continuity exists (2Ω or less)
OFF
4 - 5, 5 - 8, 5 - 9
Open circuit
LO
5 - 9
Continuity exists (2Ω or less)
2.Check that the indicator is lighted at HI or LO when battery voltage is supplied to terminal 5 and terminal 8 is grounded.
3.Check that illumination is lighted when battery voltage is supplied to terminals 2 and terminal 6.


SEAT CUSHION HEATER CHECK



Measure the resistance between terminals.
Standard value: At room temperature 20 °C
Tester connection
Specified condition
Heated seat assembly terminal 1 - Seat back heater terminal 1
4.04 - 4.94 Ω <Standard seat>
4.83 - 5.85 Ω <Sports seat>
3.84 - 4.69 Ω <RECARO seat>
Heated seat assembly terminal 2 - Seat back heater terminal 1
0.23 - 0.28 Ω <Standard seat>
0.15 - 0.19 Ω <Sports seat>
0.14 - 0.18 Ω <RECARO seat>


SEATBACK HEATER CHECK



Measure the resistance between terminals.
Standard value: At room temperature 20 °C
Tester connection
Specified condition
terminal 1 - terminal 2
4.86 - 5.94 Ω <Standard seat>
4.06 - 4.96 Ω <Sports seat>
5.40 - 6.60 Ω <RECARO seat>

HEATED SEAT RELAY CONTINUITY CHECK



Battery voltage
Tester connection
Specified condition
Not applied
3 - 4
Open circuit

  • Connect terminal 2 to the positive battery terminal
  • Connect terminal 1 to the negative battery terminal

3 - 4
Continuity exists (2Ω or less)