INSPECTION





caution
  • Never measure the side-airbag module (squib) circuit resistance even with the specified tester. Measuring the circuit resistance with a tester causes accidental air bag deployment due to current that flows or static, resulting in serious personal injury.
  • When replacing the parts, discard the old parts after deploying the air bag according to the specified procedure (Refer to ).
If any malfunction is found in the following inspections, replace the front seatback pad and frame assembly with the new one. Discard the removed front seatback pad and frame assembly after deploying the air bag according to the specified procedure (Refer to ).

  1. Dent or deformation to side-airbag module deployment part
  2. Check the harness and connector for damage and the terminal for deformation.