Pull the parking brake lever. (The parking brake switch is in the ON state.) <M/T>
Move the shift lever to the position other than the reverse position. <M/T>
Move the selector lever to the P position. <A/T, CVT or TC-SST>
Perform the operation test within 15 minutes after turning the ignition switch from OFF to ON.
Turn the AFS control switch to the OFF position. (The AFS OFF indicator lamp of the combination meter is OFF.)
Turn the lighting switch to the HEAD or AUTO position. (The headlamp relay LO is ON.)
The rotation angle of the steering wheel is 25° or less from the neutral position.
OPERATION TEST
When the steering wheel is turned toward either right or left to 45° or more from the neutral position, check if the bending lamp of the relevant side is turned ON.
When the rotation angle of steering wheel from the neutral position is returned to 25° or less, check that the bending lamp is turned OFF.
PROHIBITION CONDITIONS OF OPERATION TEST
After the ignition switch is turned ON from OFF, 15 minutes or more has been elapsed.
The vehicle is running.
When the parking brake lever is released. (The parking brake switch is in the OFF state.) <M/T>
The selector lever is in the position other than the P position. <A/T, CVT or TC-SST>