SPECIAL TOOLS


Tool
 Number
 Name
 Use


MB991367
 Special spanner
 Removal and installation of the A/C compressor armature mounting nut


MB991386
 Pin


MB990900 or MB991164
 Door hinge adjusting wrench
 Removal and installation of front deck cross member heater unit assembly


MB991658
 Test harness
 Inspection of the A/C pressure sensor


MB991223

  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222
 Harness set

  1. Test harness
  2. LED harness
  3. LED harness adapter
  4. Probe
 Making voltage and resistance measurements during troubleshooting

  1. Connect pin contact pressure inspection
  2. Power circuit inspection
  3. Power circuit inspection
  4. Commercial tester connection


MB992006
 Extra fine probe
 Continuity check and voltage measurement at harness wire or connector


MB991955

  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991825
  6. MB991826
 M.U.T.-III sub-assembly

  1. Vehicle Communication Interface (V. C. I).
  2. USB cable
  3. M.U.T.-III main harness A (applicable to vehicles with CAN communication)
  4. M.U.T.-III main harness B (applicable to vehicles without CAN communication)
  5. Measurement adapter
  6. Trigger harness
caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Check the A/C (The M.U.T.-III diagnosis codes display, service data display and actuator test)