|
1.
| caution |
Do not heat than necessary.
|
Immerse the refrigerant temperature sensor probe into engine oil to heat the sensor probe.
|
|
2.If the oil temperature reaches the standard value, there should be continuity between the switch terminals.
Standard value:
|
|
<1500>
Switch status
|
Operating temperature °C
|
Being turned off (No continuity)
|
150
|
Being turned on [Continuity exists (2 Ω or less)]
|
120
|
|
| note |
When the oil temperature is 150°C or more and there is no continuity, the switch will not be turned on [Continuity exists (2 Ω or less)] until the temperature reduces to 120°C or less.
|
|
|
<EXCEPT 1500>
Switch status
|
Operating temperature °C
|
Being turned off (No continuity)
|
155
|
Being turned on [Continuity exists (2 Ω or less)]
|
125
|
|
| note |
When the oil temperature is 155°C or more and there is no continuity, the switch will not be turned on [Continuity exists (2 Ω or less)] until the temperature reduces to 125°C or less.
|
|