WINDSHIELD WIPER AND WASHER



CONSTRUCTION DIAGRAM


  • 2-speed (low/high speed) windshield wiper has been adopted.
  • Intermittent wiper features a vehicle speed-dependent variable intermittent time system*.
  • Rain sensitive AUTO wiper system < Vehicles with lighting control sensor (rain sensor)>*.
  • The mist wiper is turned ON by operating the mist switch in the opposite direction of the wiper switch for easy operation. The mist wiper is equipped with the function that quickly wipes raindrops away at high speed when the mist switch is ON, and when the mist switch is OFF, at low speed until the stop position is reached. When the mist switch is briefly turned ON, the wiper operates once at low speed.
  • Wiper motor torque has been increased to improve the wiping performance while driving at high speed.
  • Mist type 2-nozzle has been adopted for the windshield washer.
  • The mist type washer nozzle has been adopted. The washer fluid is injected to a large area, improving the wiping performance.
  • Washer-linked wiper function* has been adopted. The washer fluid can be injected without operating the wiper. When the ignition switch is turned ON while the washer switch is ON, the washer motor operates but the wiper does not.
  • The comfort washer function* has been adopted.< Except for Russia>
note *: Using the customisation function, the vehicle speed-dependent variable intermittent time system, rain sensitive AUTO wiper system, the washer-linked wiper function and comfort washer function can be selected (Refer to ).

DESCRIPTION OF CONSTRUCTION AND OPERATION



Intermittent control (Vehicle speed-dependent variable type) <Initial condition: with function>





  1. ETACS calculates the windshield intermittent wiper interval T1 from the position of the windshield intermittent wiper switch on the column switch and the vehicle speed signal (sent from the combination meter to ETACS via CAN communication).
    note Using the customisation function, the vehicle speed-dependent intermittent function can be invalidated (Refer to ).
  2. When ETACS receives the ON signal of the windshield intermittent wiper switch, it turns the windshield wiper relay ON. When the wiper reaches the stop position, the windshield wiper auto-stop signal turns OFF, and the windshield wiper relay turns OFF.
    When the intermittent time T1 calculated by step 1 has elapsed after the windshield wiper relay ON, the windshield wiper relay turns ON again, and the above-mentioned operation is repeated.

Mist wiper control



When the windshield wiper mist switch on the column switch is turned ON while the ignition switch is in ACC or ON position, the column switch turns the windshield wiper relay ON. At the same time, the wiper speed switching relay turns ON (HI). When the windshield mist wiper switch is ON, the windshield wiper operates at high speed.

Low speed wiper and high speed wiper control







Windshield wiper linked with washer function <Initial condition: with function>




Wiper switch
OFF position
INT position
AUTO position
LO, HI, MIST position
Washer switch ON time (t)
Less than 0.25 seconds
0.25 seconds to less than 0.5 seconds
0.5 second or more
Less than 0.25 seconds
0.25 seconds to less than 0.5 seconds
0.5 second or more
Less than 0.25 seconds
0.25 seconds to less than 0.5 seconds
0.5 seconds to less than 0.75 seconds
0.75 second or more
-
Windshield wiper operation time (T)
0 second*
1 seconds
3 seconds
1 seconds*
1 seconds
3 seconds
1 seconds*
0 second
1 seconds
3 seconds
3 seconds




note
  • Using the customisation function, the washer linked windshield wiper function can be invalidated (Refer to ).
  • Using the customisation function, when the washer linked windshield wiper function is invalidated, only the washer operates. It is useful to melt ice from the frozen windshield.
  • *When the washer switch is turned ON for less than 0.25 seconds while the comfort washer function is enabled, the comfort washer function is activated.
  • *When the washer switch is turned ON for less than 0.25 seconds while the comfort washer function is disabled and the wiper switch is in the AUTO or INT position, the washer is not activated.

Comfort washer function <Except for Russia>



Wiper switch
Washer-linked wiper: Enabled
Washer-linked wiper: Disabled

Vehicle speed less than 130km/h
Vehicle speed 130km/h or more
Vehicle speed less than 130km/h
Vehicle speed 130km/h or more
OFF
Intermittent washer and wiping
1-second washer and wiping
1-second washer
1-second washer
INT
Intermittent washer and wiping
1-second washer and wiping
1-second washer
1-second washer
AUTO
Intermittent washer and wiping
1-second washer and wiping
Intermittent washer and wiping
1-second washer and wiping
LO
Intermittent washer and wiping
0.5-second washer
Intermittent washer and wiping
0.5-second washer
HI or MIST
1-second washer
1-second washer
1-second washer
1-second washer
note
  • The comfort washer function can be disabled by the customisation function.(Refer to .)
  • When the windshield wiper switch is operated while the comfort washer function is activated, the comfort washer function will be suspended.

Intermittent washer and wiping






  1. Turn on the windshield washer switch for less than 0.25 seconds.
  2. The windshield washer operates for 0.5 seconds.
  3. The windshield washer operates intermittently 4 to 6 times, and the windshield wipers operate, linked with the windshield washer operation.
  4. The windshield wipers operate for 3 seconds.
note
  • If the windshield washer switch is turned ON for less than 0.25 seconds when the windshield washer is injecting washer fluid for 0.5 seconds and when the windshield washer is injecting washer fluid intermittently 4 to 6 times, the intermittent washer and wiping will stop.
  • If the windshield washer switch is turned ON for less than 0.25 seconds when the windshield wipers are operating for 3 seconds, the windshield washer operates intermittently 4 to 6 times again.

1-second washer and wiping





note
  • If the windshield washer switch is turned ON for less than 0.25 seconds when the windshield wipers are operating for 3 seconds, the windshield washer operates for 1 second again.

0.5-second washer



When the windshield washer switch is turned ON for less than 0.25 seconds, the windshield washer operates for 0.5 second.

1-second washer



When the windshield washer switch is turned ON for less than 0.25 seconds, the windshield washer operates for 1 second.

Rain sensitive AUTO wiper function <Vehicles with lighting control sensor (rain sensor) >






  • The lighting control sensor detects the amount of rainfall using the reflections of infrared rays, and depending on the amount of rainfall, the windshield wiper is automatically controlled by the intermittent action or Lo-Hi action.

  • Dry windshield: All infrared rays emitted from the emitter diode are reflected by the windshield and directed to the receiver diode as they are.
  • Wet windshield: Part of the infrared rays emitted from the emitter diode are transmitted to outside of the windshield through the raindrops, and the infrared rays with reduced intensity are directed to the receiver diode.
note Using the customisation function, the rain sensitive AUTO wiper function can be invalidated (Refer to ).