REMOVAL AND INSTALLATION



REMOVAL



Disconnect the battery.

Remove:

  • The air duct (2)
  • The turbocompressor air inlet duct (1)


Remove:

  • The 4 nuts (3)
  • The bolt (4)
Release: The soundproofing (5).


Disconnect the connector (In "a").
Remove nuts (6).
Release:

  • The differential pressure sensor (11)
  • The collars (7) and (10)
note Mark the location of the pipes (8) and (9).
Disconnect the pipe (8) and (9).
Remove: The differential pressure sensor (11).

INSTALLATION



Reposition and reconnect the pipes (8) and (9) (On the differential pressure sensor (11)); (to the marks made during removal).
Reposition: The hose clamps (7) and (10).
Fit:

  • The differential pressure sensor (11)
  • The nuts (6); Tighten to 2.5 daN·m± 0.2 daN·m
Reposition: The soundproofing (5).
Fit:

  • The nuts (3)
  • The bolt (4)
  • The turbocompressor air inlet duct (1)
  • The air duct (2)
Connect the battery.