REMOVAL AND INSTALLATION



<F5MBB>






Removal steps

>>B<<
1.
Clutch cover

>>B<<
2.
Clutch disc


3.
Hose clop


4.
Clutch tube

>>A<<
5.
Concentric slave cylinder adapter

>>A<<
6.
Concentric slave cylinder


7.
Clutch fluid line bracket

<W5MBB>






Removal steps

>>B<<
1.
Clutch cover

>>B<<
2.
Clutch disc


3.
Hose clop


4.
Clutch tube

>>A<<
5.
Concentric slave cylinder adapter

>>A<<
6.
Concentric slave cylinder


7.
Clutch fluid line bracket

INSTALLATION SERVICE POINTS



>>A<< CONCENTRIC SLAVE CYLINDER/CONCENTRIC SLAVE CYLINDER ADAPTER INSTALLATION



1.After setting the concentric slave cylinder to the transmission case, tighten the flange bolt temporally.

2.Assemble the concentric slave cylinder adapter with the concentric slave cylinder.
note Fit into the groove of the transmission case.
3.Tighten the flange bolt to the specified torque.
Tightening torque: 10 ± 2 N·m

>>B<< CLUTCH DISC AND CLUTCH COVER INSTALLATION



1.Apply Mitsubishi grease to the clutch disc splines and rub it into the splines with a brush.
Specified grease:
Mitsubishi Part No. 0101011 or equivalent
2.Use the general service tool to position the clutch disc on the flywheel.
3.Install the clutch cover onto the flywheel.