TORQUE CONVERTER STALL TEST




warning Do not let anyone stand in front of or behind the vehicle while this test is performed.
1.

  • A/T fluid level: At the "HOT" mark on the dipstick
  • A/T fluid temperature: 70 - 80°C
  • Engine coolant temperature: 80 - 100°C
    note Measure A/T fluid temperature with M.U.T.-III MB991958 (M.U.T.-III sub assembly).
2.
3.
4.
5.
6.
caution
  • The throttle should not be fully open for more than five seconds.
  • If you repeat the stall test when the A/T fluid temperature is greater than 80°C, move the selector lever to the "N" position and let the engine run at approximately 1,000 r/min for at least one minute. Wait until the A/T fluid temperature returns to 80°C or less.

Standard value: Stall speed: Approx. 2,527 r/min