|
1.Check that the paddle shift lever is returned to the original position quickly when the lever is released after operation of the paddle shift lever (+/- side) (pulling to the rear side of the vehicle). In addition, check for abnormal looseness, friction and abnormal noise.
2.Remove the paddle shift assembly. (Refer to GROUP 37 - Steering Shaft  .)
|
|
3.Check the continuity between the paddle shift switch connecter terminals.
Standard value:
|
|
Paddle shift lever
|
Terminal number
|
Resistance value
|
Upshift and hold the lever.
|
1 - 2
|
Continuity exists (2 Ω or less).
|
Downshift and hold the lever.
|
2 - 3
|
No operation
|
No continuity between the terminals.
|
|
4.In the cases other than the above, replace the paddle shift assembly.
|