|
|
If the door window glass wrongly, automatically lowers while being raised, adjust or replace as follows:
|
|
|
1.Remove the door trim assembly (Refer to GROUP 52A - Door Trim  ).
|
|
|
2.Remove waterproof film (Refer to ).
|
|
|
3.Remove the window regulator assembly from the door window glass, and then raise and lower the door window glass by hand to check the operation force.
|
|
4.If the door window glass does not move up and down smoothly, check and repair as follows:
- Check the installation condition of the run channel.
- Straighten twist in the door sash.
- Check the installation condition of the lower sash.
5.If repair or adjustment is impossible, replace the door assembly.
|