SERVICE REMINDER FUNCTION SET


HOW TO SET BY OPERATING M.U.T.-III


caution
  • If the combination meter needs to be replaced, the current driving distance and elapsed days must be entered into the meter after the replacement in order to be used for service reminder function. Therefore, read "Integrated mileage for reminder," "Integrated days for reminder," "Mileage until Extra reminder," "Months until Extra reminder," and "Current schedule" from the meter before the replacement using the special function of M.U.T.-III, and note them. If "Integrated mileage for reminder" or "Integrated days for reminder" cannot be read from the meter using M.U.T.-III, use the following method.

  1. As for the driving distance for check warning, use the driving distance displayed on the multi information display.
  2. As for the elapsed days for check warning, calculate the number of elapsed days from the delivery date to the customer (service reminder function start date) and current date.
  • After the service reminder function has started, when the elapsed days for check warning is reset for the vehicle whose battery is removed for a long period (15 days or more), calculate the elapsed days from the delivery date to the customer (service reminder function start date) and the current date, and then input it.
    		•


    1. Reminder reset (Indicator off)
    2. Next schedule reminder cancel
    3. Extra reminder setting
    4. Extra reminder cancel
    5. Periodic reminder schedule set
    6. Integrated value adjustment
    7. Optional INT schedule setting

    HOW TO OPERATE M.U.T.-III
    caution Before setting, if the combination meter does not start measuring the elapsed time, turn the ignition switch to the ON position while pressing the multi information meter switch to start a measurement.
    1.Connect M.U.T.-III to the diagnosis connector (16 pin).
    2.Start the M.U.T.-III system on the PC and turn the ignition switch to the "ON" position.
    3.Select "Meter" on the "System Select" screen, and press the "OK" button.
    4.Select "Special Function" on the next screen.
    5.Select "Service Reminder" on the "Special function" screen.

    		6.Select the function to be executed from "Function List."

    • 1 Reminder reset (Indicator off) (Refer to .)
    • 2 Next schedule reminder cancel (Refer to .)
    • 3 Extra reminder setting (Refer to .)
    • 4 Extra reminder cancel (Refer to .)
    • 5 Periodic reminder schedule set (Refer to .)
    • 6 Integrated value adjustment (Refer to .)
    • 7 Optional INT schedule setting (Refer to .)

    1. REMINDER RESET (INDICATOR OFF)
    caution
    • Be careful not to execute "1 Reminder reset (Indicator off)" again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
    • If the next warning period is cancelled by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.
    The service reminder warning indicator which is currently output can be cancelled.
    note In addition to the operation of M.U.T.-III, the service reminder warning indicator can be cancelled by operating the multi information meter switch on the combination meter. Refer to .

    		1.On the "Service Reminder" screen, select "1 Reminder reset (Indicator off)."
    note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "0 km" and "0 month."
    2.Press the "OK" button.

    		3.The current warning indicator is cancelled, and the next warning period is displayed.
    note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "15000 km" and "12 month."

    2. NEXT SCHEDULE REMINDER CANCEL
    caution
    • If the next warning period is cancelled by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.
    • Only the next schedule can be deleted by executing "2. Next schedule reminder cancel". Schedules cannot be deleted one after another.
    The next warning period is cancelled, and its following warning period can be set.

    		1.On the "Service Reminder" screen, select "2 Next schedule reminder cancel."
    note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "1000 km" and "1 month."
    2.Press the "OK" button.

    		3.The next warning period is reset, and its following warning period is set.
    note The screen indicates that the warning period (Nos. 1 and 2 in the data list) is changed to "16000 km" and "13 month."

    3. EXTRA REMINDER SETTING
    In addition to the current warning period, the temporary service reminder warning period can be set.

    		1.On the "Service Reminder" screen, select "3 Extra reminder setting."
    note The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has not been set.

    		2.Set the temporary warning period (distance or month) of the "Set value."
    note Either input of distance or month can execute the setting.
    3.Press the "OK" button.

    		4.The temporary warning period is set.
    note The screen indicates that "2 month" has been added to the temporary warning period (No. 5 in the data list). (The distance of No. 4 in the data list has not been set.)

    4. EXTRA REMINDER CANCEL
    The temporary service reminder warning period which has been set can be cancelled.

    		1.On the "Service Reminder" screen, select "4 Extra reminder cancel."
    note The screen indicates that "3000 km" and "2 month" have been set to the temporary warning period (Nos. 4 and 5 in the data list).
    2.Press the "OK" button.

    		3.The temporary warning period is cancelled.
    note The screen indicates that the temporary warning period (Nos. 4 and 5 in the data list) has been cancelled.

    5. PERIODIC REMINDER SCHEDULE SET
    The service reminder schedule can be changed.
    note In addition to the operation of M.U.T.-III, the schedule can be changed by operating the multi information meter switch on the combination meter. Refer to .

    		1.On the "Service Reminder" screen, select "5 Periodic reminder schedule set."
    note The screen indicates that the current schedule (No. 7 in the data list) has been set to "EU 1."

    		2.Set the schedule to be changed from "Set value."
    3.Press the "OK" button.

    		4.The schedule is changed.
    note The screen indicates that the current schedule (No. 7 in the data list) has been changed to "EU 2."

    6. INTEGRATED VALUE ADJUSTMENT
    At the combination meter replacement or for the vehicle with its battery being removed for a long period (15 days or more), this adjustment is used to reset the mileage and elapsed days for check warning.

    		1.On the "Service Reminder" screen, select "6 Integrated value adjustment."
    note The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) are "26 km" and "0 day."

    		2.To "Set value," input the mileage and elapsed days to be reset.
    note Always input both the mileage and elapsed days.
    3.Press the "OK" button.

    		4.The mileage and elapsed days are changed. The combination meter automatically recalculates the distance and days to the nearest next check from the settings of mileage and elapsed days for check warning, and then displays them in "Data List."
    note
    • The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) have been changed to "100 km" and "30 day."
    • Set the elapsed days for check warning to "0 day" by the above resetting method, thereby the timer is reset indirectly.

    7. OPTIONAL INT SCHEDULE SETTING
    caution If the current schedule is set to the "Optional INT" by executing "5. Periodic reminder schedule set," the "set value" cannot be input. Therefore, set it to the schedule other than the "Optional INT" once, and then execute "7. Optional INT schedule setting."
    In addition to the existing schedule, the optional service reminder schedule can be set.

    		1.On the "Service Reminder" screen, select "7 Optional INT schedule setting."
    note The screen indicates that the optional schedule (Nos. 12 and 13 in the data list) has not been set.

    		2.Set the optional schedule (distance or month) of the "Set value."
    note Either input of distance or month can execute the setting.
    3.Press the "OK" button.

    		4.The optional schedule is set. The set schedule becomes effective by executing "5 Periodic reminder schedule set" and setting the schedule to "Optional INT."
    note The screen indicates that "2 month" has been added to the optional schedule (No. 13 in the data list). (The distance of No. 12 in the data list has not been set.)

    Relationship between the elapsed months and the elapsed days which are used by the service reminder function


    Number of month
    		 Number of day
    		 Number of month
    		 Number of day
    		 Number of month
    		 Number of day
    		 Number of month
    		 Number of day
    1
    		 30 - 60
    		 13
    		 396 - 425
    		 25
    		 761 - 790
    		 37
    		 1 126 - 1 156
    2
    		 61 - 90
    		 14
    		 426 - 456
    		 26
    		 791 - 821
    		 38
    		 1 157 - 1 186
    3
    		 91 - 121
    		 15
    		 457 - 486
    		 27
    		 822 - 851
    		 39
    		 1 187 - 1 217
    4
    		 122 - 151
    		 16
    		 487 - 516
    		 28
    		 852 - 882
    		 40
    		 1 218 - 1 247
    5
    		 152 - 182
    		 17
    		 517 - 547
    		 29
    		 883 - 912
    		 41
    		 1 248 - 1 277
    6
    		 183 - 212
    		 18
    		 548 - 577
    		 30
    		 913 - 943
    		 42
    		 1 278 - 1 308
    7
    		 213 - 243
    		 19
    		 578 - 608
    		 31
    		 944 - 973
    		 43
    		 1 309 - 1 338
    8
    		 244 - 273
    		 20
    		 609 - 638
    		 32
    		 974 - 1 003
    		 44
    		 1 339 - 1 369
    9
    		 274 - 303
    		 21
    		 639 - 669
    		 33
    		 1 004 - 1 034
    		 45
    		 1 370 - 1 399
    10
    		 304 - 334
    		 22
    		 670 - 699
    		 34
    		 1 035 - 1 064
    		 46
    		 1 400 - 1 430
    11
    		 335 - 364
    		 23
    		 700 - 730
    		 35
    		 1 065 - 1 095
    		 47
    		 1 431 - 1 460
    12
    		 365 - 395
    		 24
    		 731 - 760
    		 36
    		 1 096 - 1 125
    		 48
    		 1 461 - 1 491
    note
    • When the number of elapsed days is 0 to 29, the number of elapsed months is 0.
    • The combination meter performs calculation using 365.25 days for one year and 30.4375 days for one month.

    HOW TO SET BY SPECIAL OPERATION OF SWITCH



    HOW TO CANCEL THE SERVICE REMINDER WARNING


    caution
    • Be careful not to execute the service reminder warning cancellation by operating the switch again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
    • If the next warning period is cancelled by mistake, the cancelled warning period can be restored by setting a schedule different from the current one once, and then returning it to the previous schedule.
    1.
    2.
    3.
    4.
    5.
    6.
    7.

    HOW TO SET THE SCHEDULE


    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    note For schedule, "JPN", "NAS", "GCC/EXP" and "MMAL" can also be selected. However, the using shall be for "EU" only.
    10.

    Schedule table
    Schedule (M.U.T.-III display)
    		 Contents of schedule
    EU 1 (initial condition) <except vehicles for 2200>
    		 Elapsed time (month)
    		 Every 12 elapsed month
    Driving distance (miles)
    		 Every 9,000 miles of driving distance
    Driving distance (km)
    		 Every 15,000 km of driving distance
    EU 2 (initial condition) <vehicles for 2200>
    		 Elapsed time (month)
    		 Every 12 elapsed month
    Driving distance (miles)
    		 Every 12,000 miles of driving distance
    Driving distance (km)
    		 Every 20,000 km of driving distance
    Optional INT
    		 The optional schedule can be set. (Only M.U.T.-III can be set.)
    OFF Display
    		 Without function. "OFF" is displayed on the odometer/tripmeter.
    Function OFF
    		 Without function (Only M.U.T.-III can be set.)

    HOW TO INACTIVATE THE SERVICE REMINDER FUNCTION



    When "OFF Display" is selected
    • Even if the service reminder screen is displayed by operating the multi information meter switch, "OFF" is displayed.
    When "Function OFF" is selected
    • Even when the check warning period is reached, the service reminder display is not displayed.
    • Even with the multi information meter switch operation, the service reminder screen is not displayed.