Code No.U1108 Additional CAN B ECU Detected
caution | If the diagnosis code No. U1108 is set to the ETACS-ECU, always diagnose the CAN bus line. |
JUDGMENT CRITERIA
PROBABLE CAUSES
- Malfunction of the ETACS-ECU
- Malfunction of the CAN bus
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III CAN bus diagnostics
Q.
Is the check result normal?
STEP 2. Variant code check
Q.
Is the check result normal?
STEP 3. Check whether the diagnosis code is reset.
(1)Erase the diagnosis code. |
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position. |
(3)Check if diagnosis code is set. |