GENERAL INFORMATION






CONSTRUCTION DIAGRAM


COMPONENTS AND FUNCTIONS


Component
Function
ABS-ECU <Vehicles without ASC> or ASC-ECU <Vehicles with ASC>

  • The wheel speed sensor signal from the wheel speed sensor is sent to the engine-ECU <BSY, 4HN>.
  • The cruise control cancel request signal is sent to the engine-ECU.

Accelerator pedal position sensor
Informs the engine-ECU of the accelerator pedal depression.
A/T-ECU <6B3>

  • Controls the automatic transmission shifting based on the shift control signal from the engine-ECU.
  • The selector lever "N" position signal from the inhibitor switch is sent to the engine-ECU.
  • The output shaft speed sensor signal from the output shaft speed sensor is sent to the engine-ECU.

Cancel system
Clutch switch <M/T>
Because the constant speed driving is cancelled by the clutch operation, the clutch pedal status is detected.
Inhibitor switch <CVT, A/T>
Because the constant speed driving is cancelled by the selector lever operation, the "N" position is detected.
Stop lamp switch

  • Because the constant speed driving is cancelled by the brake operation, the brake pedal status is detected.
  • For the stop lamp switch, two switches, a stop lamp switch for the stop lamp illumination and a brake switch exclusively for the cruise control system, are incorporated to enhance the reliability.

Cruise control indicator lamp

  • It is included in the combination meter and illuminates when the "ON/OFF" switch is pressed (cruise control system: ON).
  • With the flashing of indicator lamp, read the diagnosis code for the cruise control system <4B1, 6B3>.

Cruise control switch
"ON/OFF" switch
Power switch for cruise control system.
"ACC/RES" switch
Vehicle speed is set with the "ACC/RES" switch and "COAST/SET" switch.
"COAST/SET" switch
"CANCEL" switch
Cancels the cruise speed setting.
CVT-ECU <4B1>

  • Controls the CVT based on the CVT control signal from the engine-ECU.
  • The selector lever "N" position signal from the inhibitor switch is sent to the engine-ECU.
  • The secondary pulley speed sensor signal from the secondary pulley speed sensor is sent to the engine-ECU.

Diagnosis connector

  • If the M.U.T.-III is connected, the data list from the engine-ECU can be read <4B1, 6B3>.
  • If the M.U.T.-III is connected, the diagnosis code and the data list from the engine-ECU can be read <BSY, 4HN>.

Engine-ECU

  • Based on the input signal from each sensors and switches, the throttle opening angle indication signal is sent <4B1, 6B3>.
  • Based on the input signal from each sensors and switches, the fuel consumption indication signal is sent <BSY, 4HN>.
  • Based on the input signal from each sensors and switches, the CVT control signal is sent to the CVT-ECU. <4BCVT>
  • Based on the input signal from each sensors and switches, the shift control signal is sent to the A/T-ECU. <6B3>
  • Based on the vehicle speed sensor signal from the vehicle speed sensor, it calculates the vehicle speed <4B1-M/T>.
  • Based on the secondary pulley speed sensor signal from the CVT-ECU, it calculates the vehicle speed <4B1-CVT>.
  • Based on the output shaft speed sensor signal from the A/T-ECU, it calculates the vehicle speed <6B3>.
  • Based on the wheel speed sensor signal from the ABS-ECU <vehicles without ASC> or ASC-ECU <vehicles with ASC>, it calculates the vehicle speed <BSY, 4HN>.
  • Based on the selector lever "N" position signal from the CVT-ECU <4B1> or A/T-ECU <6B3>, it cancels constant speed driving.
  • To the cruise control indicator lamp, the cruise control system ON/OFF signal is sent.
  • The diagnosis codes of the cruise control system are sent to the cruise control indicator lamp <4B1, 6B3>.
  • The data list of the cruise control system is sent to the diagnosis connector <4B1, 6B3>.
  • The diagnosis code and data list of the cruise control system are sent to the diagnosis connector <BSY, 4HN>.

Fuel injection system <BSY, 4HN>
Amount of fuel consumption control signal from engine-ECU.
Throttle valve control servo <4B1, 6B3>
The throttle valve opens and closes in response to the throttle angle control signal from the engine-ECU.
Throttle position sensor <4B1, 6B3>
Informs the engine-ECU of the throttle valve opening angle.
Vehicle speed sensor <4B1-M/T>
Transmits the vehicle speed signal proportional to the vehicle speed to the engine-ECU.