DEAD LOCK SYSTEM









  • The dead lock system can be operated with the transmitter <Vehicles with WCM> or the keyless operation key <Vehicles with KOS>.
  • The hazard lamp answerback are adopted.
  • Only vehicles with the central door locking system and the keyless entry system can adopt the dead lock system.

DESCRIPTION OF STRUCTURE AND OPERATION



DEAD LOCK SYSTEM FUNCTION



  • With the dead lock system, the doors cannot be unlocked by operating the inside handle even if a door glass is broken on purpose.
  • The dead lock system has the following features.

    • Doors cannot be opened to make a theft difficult.
    • Access points to the inside of the vehicle for a thief are restricted to the window openings only. This forces thief to take a longer time to access, making his/her unnatural behaviour noticeable.


  • To activate the dead lock system, press the lock button of the transmitter <Vehicles with WCM> or the keyless operation key <Vehicles with KOS> to lock all the doors and tailgate, and within 2 seconds, press the lock button again. The hazard warning lamp blinks three times, and the vehicle enters dead lock status. When the unlock button on the transmitter <Vehicles with WCM> or the keyless operation key <Vehicles with KOS> is pressed, the dead lock is deactivated, and all the doors and tailgate are unlocked. Using an adjustment function*, the number of flashing times for the hazard lamp answer-back can be changed between 0 - 7 times. The initial setting at factory is three times.
    note *: Using an adjustment function, the hazard lamp answer-back function can be enabled/disabled. This is done by using the M.U.T.-III.

DEAD LOCK TIMER FUNCTION




FAIL SAFE FUNCTION OF DEAD LOCK SYSTEM



  • If the dead lock is activated when someone remains in the vehicle, and if the person in the vehicle has the applicable key, insert the key into the ignition switch and turn it to ON position. Then the system recognizes that someone is in the vehicle and does not accept the dead lock signal. If the person in the vehicle has no applicable key, the above aid is not available.
  • In the dead lock status, when any failures such as dead battery occur, the dead lock can be deactivated and the vehicle can be unlocked by key operation.

OPERATION INHIBITION CONDITIONS




  • When the ignition key is inserted into the ignition switch.
  • When either door (including the tailgate) is open (the door switch: ON). (including door ajar)