DIAGNOSTIC FUNCTION



HOW TO READ DIAGNOSIS CODE




HOW TO ERASE DIAGNOSIS CODE




FAIL-SAFE FUNCTION



FAILURE DETECTION



Start-up (Initial check just after the ignition switch is turned ON.)
  1. CPU check

  • Performs the ROM and RAM check.
  • Actuator check

    • After CPU check has been completed, check the driving voltage with the actuator relay OFF.
    Always (During ignition ON status other than initial check operation)
    1. CPU check

    • Performs CAN communication and interactive check between CPUs.
  • Power supply check

    • Monitors the CPU supply voltage and checks if the voltage is within specifications.
  • Actuator check

    • Checks if the actuator relay turns ON according to the control.
    • Compares the command current value from CPU with the monitored current and checks if they agree.
  • External wire connection check

    • Checks if the input and output of each external wire connection is open, shorted, or stuck.