Code No. C1626: 4WD Voltage Failure
OPERATION
DIAGNOSIS CODE SET CONDITION
- Electronic control coupling solenoid voltage monitor value: 10 V or more.
PROBABLE CAUSES
- Malfunction of electronic control coupling solenoid
- Damaged harness wires and connectors
- Malfunction of 4WD-ECU
DIAGNOSIS PROCEDURE |
STEP 1. Check the wiring harness between electronic control coupling solenoid connector and 4WD-ECU connector terminal SOL+, SOL-. |
| Check the power supply, earth line for short circuit (for short to the power supply). |
Q.
Is the check result normal?
|
 Go to Step 2. |
|
 Repair the defective connector or the wiring harness. Then go to Step 4. |
|
STEP 2. Check of the electronic control coupling solenoid |
Refer to  . |
Q.
Is the check result normal?
|
| Go to Step 3. |
|
| Replace the electronic control coupling (Refer to ).
Then go to Step 4. |
|
STEP 3. Check whether the diagnosis code is reset. |
Q.
Is diagnosis code No.C1626 set?
|
| Replace the 4WD-ECU (Refer to ). Then go to Step
4. |
|
| Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent
Malfunction ). |
|
STEP 4. Check whether the diagnosis code is reset. |
Q.
Is diagnosis code No.C1626 set?
|
| Return to Step 1. |
|
| This diagnosis is complete. |
|